How do you plan a cut list for a whole run?
The arithmetic for each cabinet lives on its own page. This page is about the step after that: turning several cabinet lists into one shopping list and one set of cutting diagrams.
- Write the cut list for each cabinet from its drawing, with measured thicknesses.
- Give each cabinet a short code and every part a label that includes it.
- Group the parts by material and measured thickness.
- Estimate sheets by area for each group, then plan each group's layout as one job.
- Check the counts: requested parts equal placed plus unplaced, in every group.
- Export or print the plan and keep the labels with the parts as you cut.
What is in this example run?
The example run has four cabinets, each worked out on its own page. They are example designs, not a standard kitchen.
| Code | Cabinet | Worked on | 18 mm parts |
|---|---|---|---|
| B1 | Base cabinet, door and shelf, 600 mm | Base cabinet cut list | 9 |
| B2 | Base cabinet with three drawers, 600 mm | Base cabinet plus drawer box cut list | 10 |
| W1 | Wall cabinet, 600 mm | Wall cabinet cut list | 8 |
| W2 | Wall cabinet, 600 mm | Wall cabinet cut list | 8 |
B2 uses the base carcass without the shelf and door: two sides, a bottom, two top rails, two kick rails and three drawer fronts (596 × 177 mm and two at 596 × 292 mm). That is 9 + 10 + 8 + 8 = 35 pieces of 18 mm plywood.
Why group parts by material and thickness?
A part can only come from stock of the same material and the same thickness. The planner treats each group as its own job, and so should your shopping list.
| Group | Parts | Pieces |
|---|---|---|
| 18 mm plywood | All carcass parts, doors, drawer fronts | 35 |
| 6 mm back panel | B1 and B2 backs 770 × 600; W1 and W2 backs 698 × 578 | 4 |
| 12 mm plywood | B2 drawer sides, fronts and backs | 12 |
| 6 mm plywood | B2 drawer bottoms 524 × 486 | 3 |
The two 6 mm groups stay separate even though the thickness matches: the backs in this example are a cheaper panel and the drawer bottoms are plywood. If you buy one material for both, merge them into one group. Doors and drawer fronts are another common split: if they come from a sheet with a better face, give them their own group.
Total: 35 + 4 + 12 + 3 = 54 pieces.
How many sheets does the run need?
Sum of the 35 part areas: 7,315,304 mm².
One 2,440 × 1,220 mm sheet: 2,976,800 mm².
7,315,304 ÷ 2,976,800 = 2.46 sheets, so at least 3.
Kerflio's planner placed all 35 parts on 3 sheets, using 81.9% of the sheet area, with an example 3 mm kerf. Planned one cabinet at a time, each of the four cabinets fits on its own sheet (the drawer base uses 65.7% of its sheet, the wall cabinets 52.2% each), so the separate approach buys 4 sheets. Combining the run saves one sheet here because the wall cabinet parts fill the space the base cabinets leave.
The other groups:
- Backs: two columns across the thin sheet, 600 + 3 + 600 = 1,203 mm of 1,220, and each column holds a base back above a wall back, 770 + 3 + 698 = 1,471 mm of 2,440. One sheet; the planner agreed.
- Drawer boxes: one sheet of 12 mm plywood, worked on the drawer box page.
- Drawer bottoms: one sheet of 6 mm plywood, about a quarter used.
| Material | Sheets |
|---|---|
| 18 mm plywood, 2,440 × 1,220 | 3 |
| 6 mm back panel, 2,440 × 1,220 | 1 |
| 12 mm plywood, 2,440 × 1,220 | 1 |
| 6 mm plywood, 2,440 × 1,220 | 1 |
Buy against the plan, then check each sheet's real size and thickness when it arrives. A thicker or thinner panel changes the between-the-sides parts, so rerun the plan with the measured figure. The leftovers from the thin and 12 mm sheets are large; keep them for the next cabinets (see what offcuts to keep).
How should you label the parts?
Use labels that say which cabinet, which part and which side, so a part off the saw can be matched to its place without the drawing. A simple scheme:
| Label | Meaning |
|---|---|
| B1-SIDE-L | Cabinet B1, left side |
| B1-RAIL-TOP-F | Cabinet B1, front top rail |
| B2-FRONT-1 | Cabinet B2, top drawer front |
| B2-D3-SIDE | Cabinet B2, third drawer box, side |
| W2-SHELF-ADJ | Cabinet W2, adjustable shelf |
- Write the label on the face that stays hidden, with an arrow for grain direction and a mark for the front edge.
- Label identical parts individually when they go in different cabinets, even if the sizes match. A 564 × 100 rail from B1 and one from B2 are interchangeable, but the label tells you how many each cabinet still needs.
- Keep labels short. The cutting diagram prints them on small parts; how to read a cutting diagram shows where they appear.
How do you get the run into Kerflio as a CSV file?
The Kerflio Android app imports a CSV file with a header row. The CSV format guide lists the headers; the required ones are type, label, material, quantity, thickness, width and length. Grain and can_rotate are optional.
A few rows from this run, in millimetres:
type,label,material,thickness,width,length,quantity,grain,can_rotate,unit stock,Plywood sheet,Plywood,18,1220,2440,4,length,,mm part,B1-SIDE,Plywood,18,554,870,2,length,false,mm part,B1-BOTTOM,Plywood,18,554,564,1,none,true,mm part,B2-FRONT-1,Plywood,18,177,596,1,length,false,mm part,W1-SIDE,Plywood,18,300,720,2,length,false,mm
Two habits make the import behave:
- Put the grain dimension in the length column. A drawer front with horizontal grain is entered as width 177, length 596, grain length.
- Offer one more sheet than you expect to need. The plan shows what it used and lists anything it could not place.
This run has 54 pieces. The free web planner and the app's free plan take up to 12 pieces, so they can check one cabinet at a time. The app's one-time full access takes up to 150 pieces, which covers the whole run in one plan per material group.
What ends up on each 18 mm sheet?
It helps to see where the cabinets mix, because that is where the saving comes from. Kerflio's three-sheet plan for the 18 mm group, with an example 3 mm kerf, put the parts like this:
| Sheet | Parts | Notes |
|---|---|---|
| 1 | B1 and B2 sides (4), B1 bottom, B1 top rails (2), one B1 kick rail, B2 kick rails (2), one B2 drawer front | The four tall sides share one sheet; rails fill the gaps |
| 2 | B1 door, W1 and W2 doors, W1 and W2 sides (4), B2 top drawer front, B2 top rails (2), one B1 kick rail, one B2 drawer front | Doors and sides with locked grain |
| 3 | B2 bottom, W1 and W2 tops and bottoms (4), fixed shelves (2), adjustable shelves (3), hanging rails (2) | Largest leftover about 717 × 697 mm |
No single cabinet stays on one sheet. That is normal for a combined plan, and it is why the labels matter: without them, sorting sheet 3 into four cabinets means measuring every part again.
Before you cut, check the plan against this list:
- Every group shows requested equal to placed, with nothing unplaced.
- The thickness in each group is the measured one, not the label.
- Sides, doors and drawer fronts are locked against rotation; hidden parts are free.
- The kerf is your measured blade kerf. See measure your saw kerf.
- Large leftovers are marked to keep, with their size written on them.
In what order should a whole kitchen be cut?
Cut one material group at a time and finish the large parent strips before cutting them into parts. The cutting order guide and breaking down plywood sheets cover the sequence. Stack finished parts by cabinet code, not by size, so assembly does not start with a search.
What mistakes are common when planning a whole run?
- Planning each cabinet on its own. In this example it costs a fourth sheet of 18 mm plywood.
- Mixing thicknesses in one group. A 12 mm drawer side cannot come from an 18 mm sheet, and a planner given both under one material name will treat them as different stock anyway.
- Copying sizes between cabinets with different depths. Base and wall rails are both 564 mm long here, but their shelves and backs differ.
- Labels that only say "side". Five cabinets give ten sides, and a few of them are mirror images once grooves are cut.
- Rerunning the plan with the label thickness after measuring a different real thickness.
Frequently asked questions
Should doors come from the same sheets as the carcasses?
Only if you are happy with that face. Many builders give doors and drawer fronts their own material group so the best sheets go to the visible parts.
Does combining cabinets always save a sheet?
No. It depends on how the parts fit. In this example it saves one of four; another run might save none. The plan tells you.
Can I export the plan?
The Android app exports a CSV cut list and shares a PDF of the plan. The web planners show the plan in your browser.
How do I handle a cabinet wider than 600 mm?
Rework that cabinet on its own page first, then add its parts to the right material groups and replan the run.
How this page was made: written by Certloom Learning from the sources cited on the page and arithmetic checked in code; layout counts come from the Kerflio planning engine. Kerflio is an independent tool. Check sizes against your own material and equipment.