What is the board foot formula?
Hardwood is usually priced by volume, and the North American unit is the board foot. One board foot is 1 in × 12 in × 12 in. Two forms of the formula give the same answer:
The American Hardwood Export Council guide to measuring US hardwood under NHLA rules gives the second form. In metric, one board foot is 2.3597 litres, or 0.0023597 m³, computed from 144 in³ × 0.0254³.
Source: American Hardwood Export Council, measuring US hardwood lumber, checked 2026-11-14.
Worked examples
1 × 6 × 96 ÷ 144 = 4 board feet
Same with feet: 1 × 6 × 8 ÷ 12 = 4
2 × 7 × 10 ÷ 12 = 11.67 board feet (11.666667 before rounding)
1.5 × 5.5 × 9 ÷ 12 = 6.1875 board feet
One leg: 2 × 3 × 30 ÷ 144 = 1.25 board feet
Four legs: 4 × 1.25 = 5 board feet of finished volume
You cannot buy exactly that. The stock has to be thicker before planing, and each leg comes out of a longer board, as the next sections explain.
Volume: 0.025 × 0.150 × 2.400 = 0.009 m³
Board feet: 0.009 ÷ 0.0023597 = 3.81 board feet
For quick estimates, the table gives board feet per linear foot. Multiply by the board length in feet.
| Thickness | 4 in wide | 6 in wide | 8 in wide | 10 in wide | 12 in wide |
|---|---|---|---|---|---|
| 4/4 (1 in) | 0.3333 | 0.5 | 0.6667 | 0.8333 | 1 |
| 5/4 (1.25 in) | 0.4167 | 0.625 | 0.8333 | 1.0417 | 1.25 |
| 6/4 (1.5 in) | 0.5 | 0.75 | 1 | 1.25 | 1.5 |
| 8/4 (2 in) | 0.6667 | 1 | 1.3333 | 1.6667 | 2 |
What do 4/4, 5/4 and 8/4 mean?
Hardwood thickness is named in quarters of an inch. 4/4 (four quarter) is 1 in rough, 5/4 is 1 1/4 in, 6/4 is 1 1/2 in and 8/4 is 2 in. These are rough-sawn thicknesses. Once a board is surfaced on two sides (S2S) it is thinner. The USDA Forest Products Laboratory Wood Handbook lists the standard rough and S2S thicknesses for hardwood lumber:
| Rough (in) | Rough (mm) | S2S (in) | S2S (mm) |
|---|---|---|---|
| 3/8 | 9.5 | 3/16 | 4.8 |
| 1/2 | 12.7 | 5/16 | 7.9 |
| 5/8 | 15.9 | 7/16 | 11.1 |
| 3/4 | 19.0 | 9/16 | 14.3 |
| 1 (4/4) | 25.4 | 13/16 | 20.6 |
| 1 1/4 (5/4) | 31.8 | 1 1/16 | 27.0 |
| 1 1/2 (6/4) | 38.1 | 1 5/16 | 33.3 |
| 1 3/4 (7/4) | 44.4 | 1 1/2 | 38.1 |
| 2 (8/4) | 50.8 | 1 3/4 | 44.4 |
| 2 1/2 (10/4) | 63.5 | 2 1/4 | 57.2 |
| 3 (12/4) | 76.2 | 2 3/4 | 69.9 |
| 3 1/2 (14/4) | 88.9 | 3 1/4 | 82.6 |
| 4 (16/4) | 101.6 | 3 3/4 | 95.3 |
Source: USDA Forest Products Laboratory, Wood Handbook (FPL-GTR-282), chapter 6, Table 6-4, checked 2026-11-14.
So a 4/4 board surfaced on both faces is 13/16 in thick, not 1 in. The AHEC guide gives the same rule in another form: for lumber 1 1/2 in and thinner, subtract 3/16 in from the nominal thickness to get the finished thickness, and for 1 3/4 in and thicker subtract 1/4 in. The same guide notes that rough kiln-dried lumber from 3/8 in to 1 3/4 in may be 1/16 in scant of nominal, and 2 in and thicker may be 1/8 in scant.
Softwood dimension lumber uses a different naming system. A 2×4 is 1 1/2 × 3 1/2 in dry. See nominal versus actual lumber sizes.
Which thickness goes into the board foot formula?
Ask your supplier. The Wood Handbook's purchasing advice is that board measure depends on the thickness and width nomenclature used, nominal or actual, and that this should be spelled out when buying. For rough hardwood sold by the quarter, board feet are normally worked out from the quarter thickness, 1 in for 4/4. For surfaced or dressed stock, a price per board foot may use the rough thickness the board was cut from, or a seller may price per linear foot instead. Two quotes for the same board can differ simply because one counts 4/4 as 1 in and the other as 13/16 in.
The width and length rules also matter. The AHEC guide describes tallying a 5 1/4 in × 8 1/2 ft board as 5 in × 8 ft, so a board with random width can be tallied smaller than its full size. Check how your supplier rounds before comparing prices. For a short list of boards the rounding can be a noticeable share of the total, so it is worth asking for the tally sheet with the invoice.
Source: Wood Handbook (FPL-GTR-282), chapter 6, Important Purchase Considerations, checked 2026-11-14.
Why does a cut list use actual sizes while buying uses board feet?
The saw cuts the board you actually have. A cut list must hold the finished size of each part: 13/16 in if you plan to use surfaced 4/4 as is, or whatever thickness you will plane to. Planning with 1 in for a part that will be 13/16 in throws off every joint that depends on thickness.
Board feet answer a different question: how much wood to pay for. Volume alone cannot tell you whether parts fit. Six shelves 5 in wide and 30 in long need 5.0781 board feet at 13/16 in finished, or 6.25 board feet counted at 1 in rough. Neither number says whether those parts come out of the boards on the rack, because boards have fixed widths and lengths and every cut removes a kerf.
A sound buying method uses both:
- Write the cut list in actual finished sizes.
- Decide the stock thickness for each part: 4/4 for parts that finish at 3/4 in or 13/16 in, 5/4 or 6/4 for thicker parts after planing.
- Plan the boards, not the volume. Lay the parts on real board widths and lengths, including kerf and end trim, in the linear cut planner or by hand.
- Add up the board feet of the boards that plan uses. That is your purchase.
Planned stock: 3 boards of 4/4, 7 in wide, 8 ft long.
One board: 1 × 7 × 8 ÷ 12 = 4.6667 board feet. Three boards: 14 board feet to buy.
Finished volume of the shelves at 13/16 in: 5.0781 board feet. The difference covers planing, ripping 7 in boards to 5 in, kerfs and offcuts.
The 7 in width and three-board count here are an illustration. Use the widths your yard actually has.
Common board foot mistakes
- Mixing feet and inches in one formula. Divide by 144 when all three dimensions are in inches and by 12 when the length is in feet.
- Using the finished thickness to estimate cost when the yard prices on rough thickness, or the other way round.
- Buying the finished volume with no allowance. Board feet of parts are always less than board feet of stock.
- Entering fractional widths as decimals by eye. A width of 5 1/2 in is 5.5 in, and 5 3/8 in is 5.375 in, not 5.38 or 5.3. The fraction to decimal chart has every 64th.
- Applying hardwood quarter rules to softwood. A 2×6 is not priced or sized like 8/4 hardwood 6 in wide.
- Assuming a board is the length on the tag. Measure it and plan with the usable length; see standard lumber lengths.
Does Kerflio calculate board feet?
No. Kerflio plans where each part comes from on sheets and boards, counts the kerf and reports placed and unplaced parts and leftover length. Use it to decide how many boards you need, then apply the board foot formula above to those boards. Thickness is kept as a stock property so parts only come from matching material.
Frequently asked questions
How many cubic inches is a board foot?
144 cubic inches: 1 in × 12 in × 12 in.
How many board feet is a 4/4 board 6 in wide and 8 ft long?
1 × 6 × 8 ÷ 12 = 4 board feet.
How thick is 4/4 lumber after surfacing?
The Wood Handbook standard thickness for 4/4 hardwood surfaced on two sides is 13/16 in.
Is a board foot the same in metric?
One board foot is 0.0023597 m³, about 2.36 litres.
Do I calculate board feet with nominal or actual thickness?
It depends on the seller. Rough hardwood is commonly counted at its quarter thickness; ask how surfaced stock is priced.
How this page was made: written by Certloom Learning from the sources cited on the page and arithmetic checked in code; layout counts come from the Kerflio planning engine. Kerflio is an independent tool. Check sizes against your own material and equipment.