What are the actual sizes of common lumber?
| Nominal name | Actual (mm) |
|---|---|
| 2×4 | 38 × 89 |
| 2×6 | 38 × 140 |
| 2×8 | 38 × 184 |
| 2×10 | 38 × 235 |
| 2×12 | 38 × 286 |
Source: AWC: how do I convert to metric lumber sizes, checked 2026-11-12. American Wood Council FAQ on metric lumber sizes. It says the nominal labels should not be converted and the actual sizes such as 1.5 × 3.5 in should be soft converted to 38 × 89 mm.
Why is lumber smaller than its name?
The nominal size describes the board before drying and planing. Drying shrinks it and planing removes more. The American Softwood Lumber Standard sets the finished sizes. Length is different: it is normally the actual length.
Source: NIST PS 20-25, checked 2026-11-12. NIST publishes Voluntary Product Standard PS 20, the American Softwood Lumber Standard.
What should I enter in a linear cut planner?
Enter the actual cross section and the length you measured. In the linear planner the cross section does not change what fits, but keeping it correct helps you keep different boards apart. See sheet versus linear planning.
Do sizes differ outside North America?
Yes. Sawn and planed sizes follow other conventions in other markets, and merchants list their own finished dimensions. Use the dimensions on the product listing or your own measurement.
Frequently asked questions
Is 1×4 also smaller? Yes, dressed boards are smaller than their names. Measure or check the standard for the grade and region.
Does kerf matter more for thin stock? Kerf is a length lost per cut whatever the stock, but it uses a larger share of a short offcut.
Related: Plywood sheet sizes · Board cut list example · Fractions and units
How this page was made: written by Certloom Learning from the Kerflio planning engine and the arithmetic shown. Not reviewed by a tradesperson. Check your own material and equipment.