What are the standard sheet sizes in each country?
This table compares sizes that a manufacturer, trade association or standard publishes. A merchant near you may stock fewer of them. For how a 4 × 8 ft sheet converts and why the label can differ from the real sheet, see plywood sheet sizes; this page does not repeat that.
| Region | Material | Sizes | Published by |
|---|---|---|---|
| USA | Structural plywood | Nominal 48 × 96 in, some panels made slightly under | APA |
| USA and Canada | MDF | 4 and 5 ft wide (6 ft from one Ontario mill), actual size one inch over stated, so a 4 × 8 is about 49 × 97 in | Roseburg |
| Canada | Softwood plywood | 1220 × 2440 mm, also 1200 × 2400 mm | Canadian Plywood Association |
| UK and Ireland | MDF | 1220 × 2440, 1220 × 2745, 1220 × 3050, 2440 × 1830, 1525 × 2440, 1525 × 2745, 1525 × 3050 mm | Medite |
| UK and Europe | Birch plywood | 1220 × 2440, 1250 × 2500, 1500 × 2500/3000, 1525 × 3050/3660 mm and more | WISA |
| Europe | Birch plywood | 1220 or 1250 mm × 2440, 2500, 2745, 2750, 3000 or 3050 mm, and 1500 or 1525 mm widths | Riga Wood |
| Europe | Particleboard and decor boards | 2800 × 2070 mm | EGGER |
| Australia | MDF | 2400 × 1200, 3600 × 1200 and 3600 × 1800 mm | Laminex |
| Australia and New Zealand | Structural plywood | 2400 × 1200 and 2700 × 1200 mm | Carter Holt Harvey (Ecoply) |
| Japan | Structural plywood | 910 × 1820 mm, called saburoku (3 × 6 shaku) | Keytec catalogue |
| Japan | Lauan core plywood | 1220 × 2430, 920 × 1830, 920 × 2130, 920 × 2430, 610 × 2430 mm | Tsukiita |
Sources for each row follow in the sections below.
What sizes are used in the USA and Canada?
The 4 × 8 ft sheet is the default for plywood, OSB, MDF and particleboard. APA describes a "traditional nominal 48 inches by 96 inches" panel and notes that some sheathing is made slightly under that size and marked Sized for Spacing.
Source: APA plywood overview, checked 2026-11-14.
Canada sells the same format under a metric name. The Canadian Plywood Association states that CANPLY EXTERIOR plywood is made 1220 × 2440 mm, "the metric equivalent of the familiar 4 ft by 8 ft panel", and is also available as 1200 × 2400 mm.
Source: Canadian Plywood Association, Plywood Design Fundamentals, checked 2026-11-14.
MDF often arrives bigger than its name. Roseburg makes 4 and 5 ft wide MDF at mills in Arkansas and Oregon, and 4, 5 and 6 ft widths at Pembroke, Ontario, and states that actual length and width are one inch over the stated size. MDF sheet sizes works through what that extra inch does to a cut list.
Source: Roseburg Medite MDF technical data sheet, checked 2026-11-14.
What sizes are used in the UK and Ireland?
The 2440 × 1220 mm sheet, usually called "8 by 4", is the everyday size. Longer 3050 mm sheets are made too: Medite lists 1220 × 3050 mm and 1525 × 3050 mm MDF, and WISA lists 1220 × 2440/3050 mm in its spruce range.
Source: Medite Premier MDF technical data sheet, checked 2026-11-14.
Source: WISA sizes, thicknesses and weights, checked 2026-11-14.
A 3050 mm sheet is useful for tall wardrobe sides, long worktop backs and shelving runs, where a 2440 mm sheet would need a joint. Ask the merchant before planning around it, because many yards keep only the 2440 mm length in stock.
What sizes are used in continental Europe?
Three formats turn up most often in maker literature.
- 1250 × 2500 mm plywood. WISA and Riga Wood both list it next to 1220 × 2440 mm.
- 1500 and 1525 mm wide birch plywood, in lengths up to 3050 or 3660 mm depending on the maker.
- 2800 × 2070 mm particleboard and decor boards. EGGER's availability guide lists its Eurodekor melamine faced boards and PerfectSense lacquered MDF in 2800 × 2070 mm, with Eurospan E1 P2 particleboard cores from 8 to 38 mm.
Source: WISA sizes, thicknesses and weights, checked 2026-11-14. WISA notes that the first dimension stated runs parallel to the face grain.
Source: Riga Wood (Latvijas Finieris) Riga Prime birch plywood data sheet, checked 2026-11-14.
Source: EGGER Availability Guide (copy hosted by a distributor), checked 2026-11-14.
The 2800 × 2070 mm board is close to twice the area of a 2440 × 1220 mm sheet (5.796 m² against 2.9768 m², a ratio of about 1.95). That matters when you compare prices per sheet: compare per square metre instead.
What sizes are used in Australia and New Zealand?
The base format is 2400 × 1200 mm, which is metric rather than a converted 4 × 8 ft. Laminex lists decorated MDF in 2400 × 1200 mm and 3600 × 1200 mm and structural MDF in 3600 × 1800 mm. Carter Holt Harvey's Ecoply structural plywood is listed at 2400 or 2700 × 1200 mm, in 7 to 25 mm.
Source: Laminex product page (White Natural, all formats), checked 2026-11-14.
Source: eBOSS listing for Carter Holt Harvey Ecoply structural plywood, checked 2026-11-14.
A 2400 × 1200 mm sheet is 38.4 mm shorter and 19.2 mm narrower than a true 4 × 8 ft sheet (2438.4 − 2400 and 1219.2 − 1200). Plans drawn for North American sheets often fail by those few millimetres. The worked example below shows one.
What sizes are used in Japan?
The common plywood sheet is 910 × 1820 mm, known as saburoku, from 3 × 6 shaku. A Japanese building products guide calls it the size most often used, and Keytec's JAS structural plywood catalogue lists 910 × 1820 mm in 12, 24 and 28 mm.
Source: Biz.ne.jp article on plywood sizes (Japanese), checked 2026-11-14.
Source: Keytec JAS structural plywood catalogue page (Japanese), checked 2026-11-14.
The larger 4 × 8 shaku format also exists. Tsukiita lists 1220 × 2430 mm among its standard lauan core plywood sizes, along with 920 mm wide sheets in several lengths. Note the 2430 mm length: it is 10 mm shorter than the 2440 mm sheet sold in the UK, so measure rather than assume.
Source: Tsukiita fancy plywood standard sizes, checked 2026-11-14.
Worked example: one cut list, five sheet sizes
Say a project needs cabinet sides of 720 × 560 mm with the grain along the 720 mm edge, and the sheet grain runs along its length. The count below is a simple grid with a 3 mm kerf between parts, which is a quick way to compare formats. A planner can sometimes do better by mixing orientations of other parts in the spare space.
| Sheet | Along length | Across width | Sides per sheet |
|---|---|---|---|
| 2440 × 1220 mm | 3 (3 × 720 + 2 × 3 = 2166) | 2 (2 × 560 + 3 = 1123) | 6 |
| 2400 × 1200 mm | 3 | 2 | 6 |
| 2500 × 1250 mm | 3 | 2 | 6 |
| 2800 × 2070 mm | 3 | 3 (3 × 560 + 2 × 3 = 1686) | 9 |
| 1820 × 910 mm | 2 (2 × 720 + 3 = 1443) | 1 (two would need 1123) | 2 |
A plan rips two 24 in (609.6 mm) panels across a 48 in sheet.
Needed width: 609.6 + 609.6 + 3 = 1222.2 mm.
A 1200 mm sheet is 22.2 mm short, so the second panel cannot come out at full width.
Fix: resize the parts to the real sheet, or plan them along the length instead.
How do I use a foreign plan with local sheets?
- Convert every part to one unit first. Fractions and units shows how.
- Measure your local sheet and enter that as the stock, not the size in the plan.
- Check parts that were sized to fill a whole sheet width, such as 24 in rips or 1220 mm deep worktops. Those break first.
- Keep grain rules from the original plan. Turning a part to make it fit may put the face grain the wrong way.
- Run the list in the sheet cut planner and read the unplaced parts list before you buy.
Frequently asked questions
Is 2440 × 1220 mm the same as 4 × 8 feet?
Nearly. 4 × 8 ft is exactly 1219.2 × 2438.4 mm, so 2440 × 1220 is a rounded metric version. The difference is under 2 mm each way, but measure the sheet before a tight plan.
What size is a sheet of plywood in Australia?
The common size is 2400 × 1200 mm. Carter Holt Harvey also lists 2700 × 1200 mm structural plywood, and Laminex lists 3600 mm long MDF sheets.
What is saburoku plywood?
Saburoku is the Japanese 3 × 6 shaku sheet, 910 × 1820 mm. It is the most common plywood size in Japan, with 1220 × 2430 mm also made.
Why are European decor boards 2800 × 2070 mm?
That is the format EGGER publishes for its melamine faced particleboard and lacquered MDF. It holds about 1.95 times the area of a 2440 × 1220 mm sheet, so compare prices per square metre.
Which dimension is the grain direction on a metric sheet?
WISA states that the first dimension it lists runs parallel to the face grain. Other makers may write sizes differently, so check the label or the veneer itself.
How this page was made: written by Certloom Learning from the sources cited on the page and arithmetic checked in code; layout counts come from the Kerflio planning engine. Kerflio is an independent tool. Check sizes against your own material and equipment.